HydraLine brake hose line

Sort by:
Filter
{"id":682513072171,"title":"Tandem axle HydraLine kit with 4500mm lead line","handle":"tandem-axle-hydraline-kit-4500mm-lead-line","description":"\u003cp\u003eHydraLine is available in kit form for different length trailers, campers, caravans. The 4500mm tandem axle Hydraline kit is suited for caravans and boat trailers up to 7 metres (23 ft) with tandem hydraulic brakes.\u003c\/p\u003e\n\u003cp\u003eHydraLine is a flexible stainless steel braided brake hose designed to outlast conventional steel brake tubing and takes about 1\/5th of the time to fit. There are also less joins than conventional brake tubing therefore adding to the strength and durability. Made from braided stainless steel with a hardened Teflon inner tube and stainless end fittings that are already flared to seat in an inverted flare of a hydraulic union attached to the brake caliper, tee piece or to a hydraulic actuator. The Teflon inner tube limits the chance of swelling under hydraulic pressure compared to rubber brake hose. Hydraline meets Australian and international standards SAE1401J and USA DOT standards. Comes with a 1 year limited warranty.\u003cbr\u003e HydraLine comes with straight ends for lead lines, for the length of the trailer to the axle; and also 90 degree right angle fittings to fit into calipers in the shorter lengths. \u003cbr\u003e Fitting up the flexible brake line on your camper, caravan or trailer can be done in two ways: by sliding the flexible line up the box section of the trailer and pulling through holes where required, making a neater finish to the trailer; or by utilising P-clips to fasten the Hydraline to the \"i\" beam, box or C section of the trailer chassis.\u003c\/p\u003e\n\u003cp\u003eKit contents:\u003cbr\u003e Qty 1 - HL4500S - HydraLine 4500mm lead line with straight ends. \u003cbr\u003e Qty 1 - HL1000S - HydraLine 1000mm brake line with straight ends. \u003cbr\u003e Qty 1 - HL500S - HydraLine 500mm brake line with straight ends. \u003cbr\u003e Qty 2 - HL1800R - HydraLine 1800mm brake line with a 90 degree end\u003cbr\u003e Qty 2 - HL500R - HydraLine 500mm brake line with a 90 degree end\u003cbr\u003e Qty 3 - HU3 - 3 way brass tee for 3\/16th tube\u003c\/p\u003e\n\u003cp\u003eGenuine HydraLine contains the brand name on the braided brake line.\u003cbr\u003e Meets Australian Standards and International standards.\u003cbr\u003e Regular maintenance including \"bleeding\" of hydraulic brake lines is required to ensure the life of your brake calipers, actuator and brake lines.\u003cbr\u003e All calipers should be supplied with their own brake line union. If you do not have this union please purchase:\u003cbr\u003e HU4 - for Trojan, Alko, Meher, Trigg and Ark calipers\u003cbr\u003e HU5-M10 - for PBR type 1 and 2 calipers\u003cbr\u003e CW1 - Copper washer is required for use with both HU4 and HU5-M10\u003c\/p\u003e","published_at":"2018-05-17T10:53:31+10:00","created_at":"2018-01-03T14:34:27+10:00","vendor":"Trailer Spares Direct","type":"HydraLine","tags":["brake fittings","Hydraline","Hydraulic brake","Trailer brakes"],"price":23650,"price_min":23650,"price_max":23650,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":13017407488043,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"HL4500-2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Tandem axle HydraLine kit with 4500mm lead line","public_title":null,"options":["Default Title"],"price":23650,"weight":1030,"compare_at_price":null,"inventory_quantity":12,"inventory_management":"shopify","inventory_policy":"deny","barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/HL4500-2_d6478041-a50d-49a1-b487-f0616327abe7.jpg?v=1520837170","\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/HYDRAline_2_32ff762a-98a0-4312-8f48-ccdf9bb9028e.jpg?v=1535351664","\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/Hydraline_ends_2c2a08e7-579f-4708-b349-313dbdeb795f.jpg?v=1535598266","\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/HL_ENDS_44468d2b-4605-48b0-a66f-a24481c0f68e.jpg?v=1535598657"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/HL4500-2_d6478041-a50d-49a1-b487-f0616327abe7.jpg?v=1520837170","options":["Title"],"content":"\u003cp\u003eHydraLine is available in kit form for different length trailers, campers, caravans. The 4500mm tandem axle Hydraline kit is suited for caravans and boat trailers up to 7 metres (23 ft) with tandem hydraulic brakes.\u003c\/p\u003e\n\u003cp\u003eHydraLine is a flexible stainless steel braided brake hose designed to outlast conventional steel brake tubing and takes about 1\/5th of the time to fit. There are also less joins than conventional brake tubing therefore adding to the strength and durability. Made from braided stainless steel with a hardened Teflon inner tube and stainless end fittings that are already flared to seat in an inverted flare of a hydraulic union attached to the brake caliper, tee piece or to a hydraulic actuator. The Teflon inner tube limits the chance of swelling under hydraulic pressure compared to rubber brake hose. Hydraline meets Australian and international standards SAE1401J and USA DOT standards. Comes with a 1 year limited warranty.\u003cbr\u003e HydraLine comes with straight ends for lead lines, for the length of the trailer to the axle; and also 90 degree right angle fittings to fit into calipers in the shorter lengths. \u003cbr\u003e Fitting up the flexible brake line on your camper, caravan or trailer can be done in two ways: by sliding the flexible line up the box section of the trailer and pulling through holes where required, making a neater finish to the trailer; or by utilising P-clips to fasten the Hydraline to the \"i\" beam, box or C section of the trailer chassis.\u003c\/p\u003e\n\u003cp\u003eKit contents:\u003cbr\u003e Qty 1 - HL4500S - HydraLine 4500mm lead line with straight ends. \u003cbr\u003e Qty 1 - HL1000S - HydraLine 1000mm brake line with straight ends. \u003cbr\u003e Qty 1 - HL500S - HydraLine 500mm brake line with straight ends. \u003cbr\u003e Qty 2 - HL1800R - HydraLine 1800mm brake line with a 90 degree end\u003cbr\u003e Qty 2 - HL500R - HydraLine 500mm brake line with a 90 degree end\u003cbr\u003e Qty 3 - HU3 - 3 way brass tee for 3\/16th tube\u003c\/p\u003e\n\u003cp\u003eGenuine HydraLine contains the brand name on the braided brake line.\u003cbr\u003e Meets Australian Standards and International standards.\u003cbr\u003e Regular maintenance including \"bleeding\" of hydraulic brake lines is required to ensure the life of your brake calipers, actuator and brake lines.\u003cbr\u003e All calipers should be supplied with their own brake line union. If you do not have this union please purchase:\u003cbr\u003e HU4 - for Trojan, Alko, Meher, Trigg and Ark calipers\u003cbr\u003e HU5-M10 - for PBR type 1 and 2 calipers\u003cbr\u003e CW1 - Copper washer is required for use with both HU4 and HU5-M10\u003c\/p\u003e"}
Hydraline kit 4500mm tandem axle diagram

Tandem axle HydraLine kit with 4500mm lead line

$236.50 incl. GST

HydraLine is available in kit form for different length trailers, campers, caravans. The 4500mm tandem axle Hydraline kit is suited for caravans and boat trailers up to 7 metres (23 ft) with tandem hydraulic brakes. HydraLine is a flexible stainless steel braided brake hose designed to outlast conventional steel brake tubing and takes about 1/5t...


More Info
{"id":682512384043,"title":"Single axle HydraLine kit with 2500mm lead line","handle":"single-axle-hydraline-kit-2500mm-lead-line","description":"\u003cp\u003eHydraLine is available in kit form for different length trailers, campers, caravans. The 2500mm single axle Hydraline kit is suited for box trailers, campers and small boat trailers with hydraulic brakes.\u003c\/p\u003e\n\u003cp\u003eHydraLine is a flexible stainless steel braided brake hose designed to outlast conventional steel brake tubing and takes about 1\/5th of the time to fit. There are also less joins than conventional brake tubing therefore adding to the strength and durability. Made from braided stainless steel with a hardened Teflon inner tube and stainless end fittings that are already flared to seat in an inverted flare of a hydraulic union attached to the brake caliper, tee piece or to a hydraulic actuator. The Teflon inner tube limits the chance of swelling under hydraulic pressure compared to rubber brake hose. Hydraline meets Australian and international standards SAE1401J and USA DOT standards. Comes with a 1 year limited warranty.\u003cbr\u003e HydraLine comes with straight ends for lead lines, for the length of the trailer to the axle; and also 90 degree right angle fittings to fit into calipers in the shorter lengths. \u003cbr\u003e Fitting up the flexible brake line on your camper, caravan or trailer can be done in two ways: by sliding the flexible line up the box section of the trailer and pulling through holes where required, making a neater finish to the trailer; or by utilising P-clips to fasten the Hydraline to the \"i\" beam, box or C section of the trailer chassis.\u003c\/p\u003e\n\u003cp\u003eKit contents:\u003cbr\u003e Qty 1 - HL2500S - HydraLine 2500mm lead line with straight ends. \u003cbr\u003e Qty 1 - HL1200R - HydraLine 1200mm brake line with a 90 degree end\u003cbr\u003e Qty 1 - HL500R - HydraLine 500mm brake line with a 90 degree end\u003cbr\u003e Qty 1 - HU3 - 3 way brass tee for 3\/16th tube\u003c\/p\u003e\n\u003cp\u003eGenuine HydraLine contains the brand name on the braided brake line.\u003cbr\u003e Meets Australian Standards and International standards.\u003cbr\u003e Regular maintenance including \"bleeding\" of hydraulic brake lines is required to ensure the life of your brake calipers, actuator and brake lines. \u003cbr\u003e All calipers should be supplied with their own brake line union. If you do not have this union please purchase:\u003cbr\u003e HU4 - for Trojan, Alko, Meher, Trigg and Ark calipers\u003cbr\u003e HU5-M10 - for PBR type 1 and 2 calipers\u003cbr\u003e CW1 - Copper washer is required for use with both HU4 and HU5-M10\u003c\/p\u003e","published_at":"2018-05-15T16:21:21+10:00","created_at":"2018-01-03T14:34:19+10:00","vendor":"Trailer Spares Direct","type":"HydraLine","tags":["brake fittings","Hydraline","Hydraulic brake","Trailer brakes"],"price":11550,"price_min":11550,"price_max":11550,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":13017407717419,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"HL2500-1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Single axle HydraLine kit with 2500mm lead line","public_title":null,"options":["Default Title"],"price":11550,"weight":440,"compare_at_price":null,"inventory_quantity":11,"inventory_management":"shopify","inventory_policy":"deny","barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/HL2500-1_8e3ab02f-e7f8-4b39-a912-eb49576b2965.jpg?v=1520837178","\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/HYDRAline_2_c6163203-de95-4c22-8582-39c43bef22cf.jpg?v=1535351578","\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/Hydraline_ends_211f4761-46d8-4af1-b38e-7d7e7fd3bb58.jpg?v=1535598228","\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/HL_ENDS_cfbcc8a9-5c96-4a27-9015-4e818de3b99a.jpg?v=1535598557"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/HL2500-1_8e3ab02f-e7f8-4b39-a912-eb49576b2965.jpg?v=1520837178","options":["Title"],"content":"\u003cp\u003eHydraLine is available in kit form for different length trailers, campers, caravans. The 2500mm single axle Hydraline kit is suited for box trailers, campers and small boat trailers with hydraulic brakes.\u003c\/p\u003e\n\u003cp\u003eHydraLine is a flexible stainless steel braided brake hose designed to outlast conventional steel brake tubing and takes about 1\/5th of the time to fit. There are also less joins than conventional brake tubing therefore adding to the strength and durability. Made from braided stainless steel with a hardened Teflon inner tube and stainless end fittings that are already flared to seat in an inverted flare of a hydraulic union attached to the brake caliper, tee piece or to a hydraulic actuator. The Teflon inner tube limits the chance of swelling under hydraulic pressure compared to rubber brake hose. Hydraline meets Australian and international standards SAE1401J and USA DOT standards. Comes with a 1 year limited warranty.\u003cbr\u003e HydraLine comes with straight ends for lead lines, for the length of the trailer to the axle; and also 90 degree right angle fittings to fit into calipers in the shorter lengths. \u003cbr\u003e Fitting up the flexible brake line on your camper, caravan or trailer can be done in two ways: by sliding the flexible line up the box section of the trailer and pulling through holes where required, making a neater finish to the trailer; or by utilising P-clips to fasten the Hydraline to the \"i\" beam, box or C section of the trailer chassis.\u003c\/p\u003e\n\u003cp\u003eKit contents:\u003cbr\u003e Qty 1 - HL2500S - HydraLine 2500mm lead line with straight ends. \u003cbr\u003e Qty 1 - HL1200R - HydraLine 1200mm brake line with a 90 degree end\u003cbr\u003e Qty 1 - HL500R - HydraLine 500mm brake line with a 90 degree end\u003cbr\u003e Qty 1 - HU3 - 3 way brass tee for 3\/16th tube\u003c\/p\u003e\n\u003cp\u003eGenuine HydraLine contains the brand name on the braided brake line.\u003cbr\u003e Meets Australian Standards and International standards.\u003cbr\u003e Regular maintenance including \"bleeding\" of hydraulic brake lines is required to ensure the life of your brake calipers, actuator and brake lines. \u003cbr\u003e All calipers should be supplied with their own brake line union. If you do not have this union please purchase:\u003cbr\u003e HU4 - for Trojan, Alko, Meher, Trigg and Ark calipers\u003cbr\u003e HU5-M10 - for PBR type 1 and 2 calipers\u003cbr\u003e CW1 - Copper washer is required for use with both HU4 and HU5-M10\u003c\/p\u003e"}
Hydraline kit 2500mm single axle diagram

Single axle HydraLine kit with 2500mm lead line

$115.50 incl. GST

HydraLine is available in kit form for different length trailers, campers, caravans. The 2500mm single axle Hydraline kit is suited for box trailers, campers and small boat trailers with hydraulic brakes. HydraLine is a flexible stainless steel braided brake hose designed to outlast conventional steel brake tubing and takes about 1/5th of the ti...


More Info
{"id":682512646187,"title":"Single axle HydraLine kit with 3500mm lead line","handle":"single-axle-hydraline-kit-3500mm","description":"\u003cp\u003eHydraLine is available in kit form for different length trailers, campers, caravans. The3500mm single axle Hydraline kit is suited for large box trailers, campers, caravans and boat trailers with hydraulic brakes.\u003c\/p\u003e\n\u003cp\u003eHydraLine is a flexible stainless steel braided brake hose designed to outlast conventional steel brake tubing and takes about 1\/5th of the time to fit. There are also less joins than conventional brake tubing therefore adding to the strength and durability. Made from braided stainless steel with a hardened Teflon inner tube and stainless end fittings that are already flared to seat in an inverted flare of a hydraulic union attached to the brake caliper, tee piece or to a hydraulic actuator. The Teflon inner tube limits the chance of swelling under hydraulic pressure compared to rubber brake hose. Hydraline meets Australian and international standards SAE1401J and USA DOT standards. Comes with a 1 year limited warranty.\u003cbr\u003e HydraLine comes with straight ends for lead lines, for the length of the trailer to the axle; and also 90 degree right angle fittings to fit into calipers in the shorter lengths. \u003cbr\u003e Fitting up the flexible brake line on your camper, caravan or trailer can be done in two ways: by sliding the flexible line up the box section of the trailer and pulling through holes where required, making a neater finish to the trailer; or by utilising P-clips to fasten the Hydraline to the \"i\" beam, box or C section of the trailer chassis.\u003c\/p\u003e\n\u003cp\u003eKit contents:\u003cbr\u003e Qty 1 - HL3500S - HydraLine 3500mm lead line with straight ends. \u003cbr\u003e Qty 1 - HL1800R - HydraLine 1800mm brake line with a 90 degree end\u003cbr\u003e Qty 1 - HL500R - HydraLine 500mm brake line with a 90 degree end\u003cbr\u003e Qty 1 - HU3 - 3 way brass tee for 3\/16th tube\u003c\/p\u003e\n\u003cp\u003eGenuine HydraLine contains the brand name on the braided brake line.\u003cbr\u003e Meets Australian Standards and International standards.\u003cbr\u003e Regular maintenance including \"bleeding\" of hydraulic brake lines is required to ensure the life of your brake calipers, actuator and brake lines.\u003cbr\u003e All calipers should be supplied with their own brake line union. If you do not have this union please purchase:\u003cbr\u003e HU4 - for Trojan, Alko, Meher, Trigg and Ark calipers\u003cbr\u003e HU5-M10 - for PBR type 1 and 2 calipers\u003cbr\u003e CW1 - Copper washer is required for use with both HU4 and HU5-M10\u003c\/p\u003e","published_at":"2018-05-15T16:22:32+10:00","created_at":"2018-01-03T14:34:22+10:00","vendor":"Trailer Spares Direct","type":"HydraLine","tags":["brake fittings","Hydraline","Hydraulic brake","Trailer brakes"],"price":13200,"price_min":13200,"price_max":13200,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":13017407619115,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"HL3500-1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Single axle HydraLine kit with 3500mm lead line","public_title":null,"options":["Default Title"],"price":13200,"weight":520,"compare_at_price":null,"inventory_quantity":5,"inventory_management":"shopify","inventory_policy":"deny","barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/HL3500-1_ad874035-f7b4-4e12-89ac-848381bb5a28.jpg?v=1520837174","\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/HYDRAline_2_06677014-0a83-4d0f-a918-f6a1d717fedc.jpg?v=1535351601","\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/Hydraline_ends_c2166565-0984-4e8c-99a3-8c87dddb01cf.jpg?v=1535598235","\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/HL_ENDS_7af7df57-f720-49d2-9acf-1a3846ef942f.jpg?v=1535598569"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/HL3500-1_ad874035-f7b4-4e12-89ac-848381bb5a28.jpg?v=1520837174","options":["Title"],"content":"\u003cp\u003eHydraLine is available in kit form for different length trailers, campers, caravans. The3500mm single axle Hydraline kit is suited for large box trailers, campers, caravans and boat trailers with hydraulic brakes.\u003c\/p\u003e\n\u003cp\u003eHydraLine is a flexible stainless steel braided brake hose designed to outlast conventional steel brake tubing and takes about 1\/5th of the time to fit. There are also less joins than conventional brake tubing therefore adding to the strength and durability. Made from braided stainless steel with a hardened Teflon inner tube and stainless end fittings that are already flared to seat in an inverted flare of a hydraulic union attached to the brake caliper, tee piece or to a hydraulic actuator. The Teflon inner tube limits the chance of swelling under hydraulic pressure compared to rubber brake hose. Hydraline meets Australian and international standards SAE1401J and USA DOT standards. Comes with a 1 year limited warranty.\u003cbr\u003e HydraLine comes with straight ends for lead lines, for the length of the trailer to the axle; and also 90 degree right angle fittings to fit into calipers in the shorter lengths. \u003cbr\u003e Fitting up the flexible brake line on your camper, caravan or trailer can be done in two ways: by sliding the flexible line up the box section of the trailer and pulling through holes where required, making a neater finish to the trailer; or by utilising P-clips to fasten the Hydraline to the \"i\" beam, box or C section of the trailer chassis.\u003c\/p\u003e\n\u003cp\u003eKit contents:\u003cbr\u003e Qty 1 - HL3500S - HydraLine 3500mm lead line with straight ends. \u003cbr\u003e Qty 1 - HL1800R - HydraLine 1800mm brake line with a 90 degree end\u003cbr\u003e Qty 1 - HL500R - HydraLine 500mm brake line with a 90 degree end\u003cbr\u003e Qty 1 - HU3 - 3 way brass tee for 3\/16th tube\u003c\/p\u003e\n\u003cp\u003eGenuine HydraLine contains the brand name on the braided brake line.\u003cbr\u003e Meets Australian Standards and International standards.\u003cbr\u003e Regular maintenance including \"bleeding\" of hydraulic brake lines is required to ensure the life of your brake calipers, actuator and brake lines.\u003cbr\u003e All calipers should be supplied with their own brake line union. If you do not have this union please purchase:\u003cbr\u003e HU4 - for Trojan, Alko, Meher, Trigg and Ark calipers\u003cbr\u003e HU5-M10 - for PBR type 1 and 2 calipers\u003cbr\u003e CW1 - Copper washer is required for use with both HU4 and HU5-M10\u003c\/p\u003e"}
Hydraline kit 3500mm single axle diagram

Single axle HydraLine kit with 3500mm lead line

$132.00 incl. GST

HydraLine is available in kit form for different length trailers, campers, caravans. The3500mm single axle Hydraline kit is suited for large box trailers, campers, caravans and boat trailers with hydraulic brakes. HydraLine is a flexible stainless steel braided brake hose designed to outlast conventional steel brake tubing and takes about 1/5th ...


More Info
{"id":682512875563,"title":"Single axle HydraLine kit with 4500mm lead line","handle":"single-axle-hydraline-kit-4500mm","description":"\u003cp\u003eHydraLine is available in kit form for different length trailers, campers, caravans. The 4500mm single axle Hydraline kit is suited for caravans and boat trailers up to 7 metres (23 ft) with hydraulic brakes.\u003c\/p\u003e\n\u003cp\u003eHydraLine is a flexible stainless steel braided brake hose designed to outlast conventional steel brake tubing and takes about 1\/5th of the time to fit. There are also less joins than conventional brake tubing therefore adding to the strength and durability. Made from braided stainless steel with a hardened Teflon inner tube and stainless end fittings that are already flared to seat in an inverted flare of a hydraulic union attached to the brake caliper, tee piece or to a hydraulic actuator. The Teflon inner tube limits the chance of swelling under hydraulic pressure compared to rubber brake hose. Hydraline meets Australian and international standards SAE1401J and USA DOT standards. Comes with a 1 year limited warranty.\u003cbr\u003e HydraLine comes with straight ends for lead lines, for the length of the trailer to the axle; and also 90 degree right angle fittings to fit into calipers in the shorter lengths. \u003cbr\u003e Fitting up the flexible brake line on your camper, caravan or trailer can be done in two ways: by sliding the flexible line up the box section of the trailer and pulling through holes where required, making a neater finish to the trailer; or by utilising P-clips to fasten the Hydraline to the \"i\" beam, box or C section of the trailer chassis.\u003c\/p\u003e\n\u003cp\u003eKit contents:\u003cbr\u003e Qty 1 - HL4500S - HydraLine 4500mm lead line with straight ends. \u003cbr\u003e Qty 1 - HL1800R - HydraLine 1800mm brake line with a 90 degree end\u003cbr\u003e Qty 1 - HL500R - HydraLine 500mm brake line with a 90 degree end\u003cbr\u003e Qty 1 - HU3 - 3 way brass tee for 3\/16th tube\u003c\/p\u003e\n\u003cp\u003eGenuine HydraLine contains the brand name on the braided brake line.\u003cbr\u003e Meets Australian Standards and International standards.\u003cbr\u003e Regular maintenance including \"bleeding\" of hydraulic brake lines is required to ensure the life of your brake calipers, actuator and brake lines.\u003cbr\u003e All calipers should be supplied with their own brake line union. If you do not have this union please purchase:\u003cbr\u003e HU4 - for Trojan, Alko, Meher, Trigg and Ark calipers\u003cbr\u003e HU5-M10 - for PBR type 1 and 2 calipers\u003cbr\u003e CW1 - Copper washer is required for use with both HU4 and HU5-M10\u003c\/p\u003e","published_at":"2018-05-16T12:25:48+10:00","created_at":"2018-01-03T14:34:24+10:00","vendor":"Trailer Spares Direct","type":"HydraLine","tags":["brake fittings","Hydraline","Hydraulic brake","Trailer brakes"],"price":14300,"price_min":14300,"price_max":14300,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":13017407520811,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"HL4500-1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Single axle HydraLine kit with 4500mm lead line","public_title":null,"options":["Default Title"],"price":14300,"weight":570,"compare_at_price":null,"inventory_quantity":7,"inventory_management":"shopify","inventory_policy":"deny","barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/HL4500-1_56a1b8af-41bb-4ec2-ae53-6b5547bb1614.jpg?v=1520837171","\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/HYDRAline_2_a1399b73-0c1b-450b-884d-1f29c94527f0.jpg?v=1535351614","\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/Hydraline_ends_4ccbc439-dee2-4ee8-b5ac-eb5baca1658c.jpg?v=1535598240","\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/HL_ENDS_80010d79-9c11-4906-ba32-ee831b2700a4.jpg?v=1535598580"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/HL4500-1_56a1b8af-41bb-4ec2-ae53-6b5547bb1614.jpg?v=1520837171","options":["Title"],"content":"\u003cp\u003eHydraLine is available in kit form for different length trailers, campers, caravans. The 4500mm single axle Hydraline kit is suited for caravans and boat trailers up to 7 metres (23 ft) with hydraulic brakes.\u003c\/p\u003e\n\u003cp\u003eHydraLine is a flexible stainless steel braided brake hose designed to outlast conventional steel brake tubing and takes about 1\/5th of the time to fit. There are also less joins than conventional brake tubing therefore adding to the strength and durability. Made from braided stainless steel with a hardened Teflon inner tube and stainless end fittings that are already flared to seat in an inverted flare of a hydraulic union attached to the brake caliper, tee piece or to a hydraulic actuator. The Teflon inner tube limits the chance of swelling under hydraulic pressure compared to rubber brake hose. Hydraline meets Australian and international standards SAE1401J and USA DOT standards. Comes with a 1 year limited warranty.\u003cbr\u003e HydraLine comes with straight ends for lead lines, for the length of the trailer to the axle; and also 90 degree right angle fittings to fit into calipers in the shorter lengths. \u003cbr\u003e Fitting up the flexible brake line on your camper, caravan or trailer can be done in two ways: by sliding the flexible line up the box section of the trailer and pulling through holes where required, making a neater finish to the trailer; or by utilising P-clips to fasten the Hydraline to the \"i\" beam, box or C section of the trailer chassis.\u003c\/p\u003e\n\u003cp\u003eKit contents:\u003cbr\u003e Qty 1 - HL4500S - HydraLine 4500mm lead line with straight ends. \u003cbr\u003e Qty 1 - HL1800R - HydraLine 1800mm brake line with a 90 degree end\u003cbr\u003e Qty 1 - HL500R - HydraLine 500mm brake line with a 90 degree end\u003cbr\u003e Qty 1 - HU3 - 3 way brass tee for 3\/16th tube\u003c\/p\u003e\n\u003cp\u003eGenuine HydraLine contains the brand name on the braided brake line.\u003cbr\u003e Meets Australian Standards and International standards.\u003cbr\u003e Regular maintenance including \"bleeding\" of hydraulic brake lines is required to ensure the life of your brake calipers, actuator and brake lines.\u003cbr\u003e All calipers should be supplied with their own brake line union. If you do not have this union please purchase:\u003cbr\u003e HU4 - for Trojan, Alko, Meher, Trigg and Ark calipers\u003cbr\u003e HU5-M10 - for PBR type 1 and 2 calipers\u003cbr\u003e CW1 - Copper washer is required for use with both HU4 and HU5-M10\u003c\/p\u003e"}
Hydraline kit 4500mm single axle diagram

Single axle HydraLine kit with 4500mm lead line

$143.00 incl. GST

HydraLine is available in kit form for different length trailers, campers, caravans. The 4500mm single axle Hydraline kit is suited for caravans and boat trailers up to 7 metres (23 ft) with hydraulic brakes. HydraLine is a flexible stainless steel braided brake hose designed to outlast conventional steel brake tubing and takes about 1/5th of th...


More Info
{"id":682513432619,"title":"Single axle HydraLine kit with 5500mm lead line","handle":"single-axle-hydraline-kit-5500mm","description":"\u003cp\u003eHydraLine is available in kit form for different length trailers, campers, caravans. The 5500mm single axle Hydraline kit is suited for caravans and boat trailers up to 7 metres (23 ft) with hydraulic brakes.\u003c\/p\u003e\n\u003cp\u003eHydraLine is a flexible stainless steel braided brake hose designed to outlast conventional steel brake tubing and takes about 1\/5th of the time to fit. There are also less joins than conventional brake tubing therefore adding to the strength and durability. Made from braided stainless steel with a hardened Teflon inner tube and stainless end fittings that are already flared to seat in an inverted flare of a hydraulic union attached to the brake caliper, tee piece or to a hydraulic actuator. The Teflon inner tube limits the chance of swelling under hydraulic pressure compared to rubber brake hose. Hydraline meets Australian and international standards SAE1401J and USA DOT standards. Comes with a 1 year limited warranty.\u003cbr\u003e HydraLine comes with straight ends for lead lines, for the length of the trailer to the axle; and also 90 degree right angle fittings to fit into calipers in the shorter lengths. \u003cbr\u003e Fitting up the flexible brake line on your camper, caravan or trailer can be done in two ways: by sliding the flexible line up the box section of the trailer and pulling through holes where required, making a neater finish to the trailer; or by utilising P-clips to fasten the Hydraline to the \"i\" beam, box or C section of the trailer chassis.\u003c\/p\u003e\n\u003cp\u003eKit contents:\u003cbr\u003e Qty 1 - HL5500S - HydraLine 5500mm lead line with straight ends. \u003cbr\u003e Qty 1 - HL1800R - HydraLine 1800mm brake line with a 90 degree end\u003cbr\u003e Qty 1 - HL500R - HydraLine 500mm brake line with a 90 degree end\u003cbr\u003e Qty 1 - HU3 - 3 way brass tee for 3\/16th tube\u003c\/p\u003e\n\u003cp\u003eGenuine HydraLine contains the brand name on the braided brake line.\u003cbr\u003e Meets Australian Standards and International standards.\u003cbr\u003e Regular maintenance including \"bleeding\" of hydraulic brake lines is required to ensure the life of your brake calipers, actuator and brake lines.\u003cbr\u003e All calipers should be supplied with their own brake line union. If you do not have this union please purchase:\u003cbr\u003e HU4 - for Trojan, Alko, Meher, Trigg and Ark calipers\u003cbr\u003e HU5-M10 - for PBR type 1 and 2 calipers\u003cbr\u003e CW1 - Copper washer is required for use with both HU4 and HU5-M10\u003c\/p\u003e","published_at":"2018-05-16T13:42:19+10:00","created_at":"2018-01-03T14:34:31+10:00","vendor":"Trailer Spares Direct","type":"HydraLine","tags":["brake fittings","Hydraline","Hydraulic brake","Trailer brakes"],"price":15950,"price_min":15950,"price_max":15950,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":13017407356971,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"HL5500-1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Single axle HydraLine kit with 5500mm lead line","public_title":null,"options":["Default Title"],"price":15950,"weight":620,"compare_at_price":null,"inventory_quantity":7,"inventory_management":"shopify","inventory_policy":"deny","barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/HL5500-1_6b484d4a-23d0-40ef-865e-23c7e064cc42.jpg?v=1520837165","\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/HYDRAline_2_89dbb1f6-3006-4bf9-8b0e-c26013dd2028.jpg?v=1535351626","\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/Hydraline_ends_4df50968-bc05-47bf-97dd-fd3c868c352e.jpg?v=1535598245","\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/HL_ENDS_d208ce9c-f19e-47ee-b9ab-63dc120eddf6.jpg?v=1535598604"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/HL5500-1_6b484d4a-23d0-40ef-865e-23c7e064cc42.jpg?v=1520837165","options":["Title"],"content":"\u003cp\u003eHydraLine is available in kit form for different length trailers, campers, caravans. The 5500mm single axle Hydraline kit is suited for caravans and boat trailers up to 7 metres (23 ft) with hydraulic brakes.\u003c\/p\u003e\n\u003cp\u003eHydraLine is a flexible stainless steel braided brake hose designed to outlast conventional steel brake tubing and takes about 1\/5th of the time to fit. There are also less joins than conventional brake tubing therefore adding to the strength and durability. Made from braided stainless steel with a hardened Teflon inner tube and stainless end fittings that are already flared to seat in an inverted flare of a hydraulic union attached to the brake caliper, tee piece or to a hydraulic actuator. The Teflon inner tube limits the chance of swelling under hydraulic pressure compared to rubber brake hose. Hydraline meets Australian and international standards SAE1401J and USA DOT standards. Comes with a 1 year limited warranty.\u003cbr\u003e HydraLine comes with straight ends for lead lines, for the length of the trailer to the axle; and also 90 degree right angle fittings to fit into calipers in the shorter lengths. \u003cbr\u003e Fitting up the flexible brake line on your camper, caravan or trailer can be done in two ways: by sliding the flexible line up the box section of the trailer and pulling through holes where required, making a neater finish to the trailer; or by utilising P-clips to fasten the Hydraline to the \"i\" beam, box or C section of the trailer chassis.\u003c\/p\u003e\n\u003cp\u003eKit contents:\u003cbr\u003e Qty 1 - HL5500S - HydraLine 5500mm lead line with straight ends. \u003cbr\u003e Qty 1 - HL1800R - HydraLine 1800mm brake line with a 90 degree end\u003cbr\u003e Qty 1 - HL500R - HydraLine 500mm brake line with a 90 degree end\u003cbr\u003e Qty 1 - HU3 - 3 way brass tee for 3\/16th tube\u003c\/p\u003e\n\u003cp\u003eGenuine HydraLine contains the brand name on the braided brake line.\u003cbr\u003e Meets Australian Standards and International standards.\u003cbr\u003e Regular maintenance including \"bleeding\" of hydraulic brake lines is required to ensure the life of your brake calipers, actuator and brake lines.\u003cbr\u003e All calipers should be supplied with their own brake line union. If you do not have this union please purchase:\u003cbr\u003e HU4 - for Trojan, Alko, Meher, Trigg and Ark calipers\u003cbr\u003e HU5-M10 - for PBR type 1 and 2 calipers\u003cbr\u003e CW1 - Copper washer is required for use with both HU4 and HU5-M10\u003c\/p\u003e"}
Hydraline kit 5500mm single axle diagram

Single axle HydraLine kit with 5500mm lead line

$159.50 incl. GST

HydraLine is available in kit form for different length trailers, campers, caravans. The 5500mm single axle Hydraline kit is suited for caravans and boat trailers up to 7 metres (23 ft) with hydraulic brakes. HydraLine is a flexible stainless steel braided brake hose designed to outlast conventional steel brake tubing and takes about 1/5th of th...


More Info
{"id":682512547883,"title":"Tandem axle HydraLine kit with 2500mm lead line","handle":"tandem-axle-hydraline-kit-2500mm-lead-line","description":"\u003cp\u003eHydraLine is available in kit form for different length trailers, campers, caravans. The 2500mm tandem axle Hydraline kit is suited for large box trailers, campers and boat trailers with tandem hydraulic brakes.\u003c\/p\u003e\n\u003cp\u003eHydraLine is a flexible stainless steel braided brake hose designed to outlast conventional steel brake tubing and takes about 1\/5th of the time to fit. There are also less joins than conventional brake tubing therefore adding to the strength and durability. Made from braided stainless steel with a hardened Teflon inner tube and stainless end fittings that are already flared to seat in an inverted flare of a hydraulic union attached to the brake caliper, tee piece or to a hydraulic actuator. The Teflon inner tube limits the chance of swelling under hydraulic pressure compared to rubber brake hose. Hydraline meets Australian and international standards SAE1401J and USA DOT standards. Comes with a 1 year limited warranty.\u003cbr\u003e HydraLine comes with straight ends for lead lines, for the length of the trailer to the axle; and also 90 degree right angle fittings to fit into calipers in the shorter lengths. \u003cbr\u003e Fitting up the flexible brake line on your camper, caravan or trailer can be done in two ways: by sliding the flexible line up the box section of the trailer and pulling through holes where required, making a neater finish to the trailer; or by utilising P-clips to fasten the Hydraline to the \"i\" beam, box or C section of the trailer chassis.\u003c\/p\u003e\n\u003cp\u003eKit contents:\u003cbr\u003e Qty 1 - HL2500S - HydraLine 2500mm lead line with straight ends. \u003cbr\u003e Qty 1 - HL1000S - HydraLine 1000mm brake line with straight ends.\u003cbr\u003e Qty 1 - HL500S - HydraLine 500mm brake line with straight ends.\u003cbr\u003e Qty 2 - HL1200R - HydraLine 1200mm brake line with a 90 degree end\u003cbr\u003e Qty 2 - HL500R - HydraLine 500mm brake line with a 90 degree end\u003cbr\u003e Qty 3 - HU3 - 3 way brass tee for 3\/16th tube\u003c\/p\u003e\n\u003cp\u003eGenuine HydraLine contains the brand name on the braided brake line.\u003cbr\u003e Meets Australian Standards and International standards.\u003cbr\u003e Regular maintenance including \"bleeding\" of hydraulic brake lines is required to ensure the life of your brake calipers, actuator and brake lines. \u003cbr\u003e All calipers should be supplied with their own brake line union. If you do not have this union please purchase:\u003cbr\u003e HU4 - for Trojan, Alko, Meher, Trigg and Ark calipers\u003cbr\u003e HU5-M10 - for PBR type 1 and 2 calipers\u003cbr\u003e CW1 - Copper washer is required for use with both HU4 and HU5-M10\u003c\/p\u003e","published_at":"2018-05-17T10:49:05+10:00","created_at":"2018-01-03T14:34:20+10:00","vendor":"Trailer Spares Direct","type":"HydraLine","tags":["brake fittings","Hydraline","Hydraulic brake","Trailer brakes"],"price":18700,"price_min":18700,"price_max":18700,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":13017407684651,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"HL2500-2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Tandem axle HydraLine kit with 2500mm lead line","public_title":null,"options":["Default Title"],"price":18700,"weight":870,"compare_at_price":null,"inventory_quantity":3,"inventory_management":"shopify","inventory_policy":"deny","barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/HL2500-2_cea632bf-7851-4934-b31d-ac1f86d0735b.jpg?v=1520837177","\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/HYDRAline_2_6b922b51-f189-4524-adfb-5fe3d2fb1d21.jpg?v=1535351636","\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/Hydraline_ends_6c569de1-f0e2-41e2-940e-9f313deb9625.jpg?v=1535598251","\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/HL_ENDS_5f04adf0-81b2-414d-96bb-d67f4ef33dd3.jpg?v=1535598619"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/HL2500-2_cea632bf-7851-4934-b31d-ac1f86d0735b.jpg?v=1520837177","options":["Title"],"content":"\u003cp\u003eHydraLine is available in kit form for different length trailers, campers, caravans. The 2500mm tandem axle Hydraline kit is suited for large box trailers, campers and boat trailers with tandem hydraulic brakes.\u003c\/p\u003e\n\u003cp\u003eHydraLine is a flexible stainless steel braided brake hose designed to outlast conventional steel brake tubing and takes about 1\/5th of the time to fit. There are also less joins than conventional brake tubing therefore adding to the strength and durability. Made from braided stainless steel with a hardened Teflon inner tube and stainless end fittings that are already flared to seat in an inverted flare of a hydraulic union attached to the brake caliper, tee piece or to a hydraulic actuator. The Teflon inner tube limits the chance of swelling under hydraulic pressure compared to rubber brake hose. Hydraline meets Australian and international standards SAE1401J and USA DOT standards. Comes with a 1 year limited warranty.\u003cbr\u003e HydraLine comes with straight ends for lead lines, for the length of the trailer to the axle; and also 90 degree right angle fittings to fit into calipers in the shorter lengths. \u003cbr\u003e Fitting up the flexible brake line on your camper, caravan or trailer can be done in two ways: by sliding the flexible line up the box section of the trailer and pulling through holes where required, making a neater finish to the trailer; or by utilising P-clips to fasten the Hydraline to the \"i\" beam, box or C section of the trailer chassis.\u003c\/p\u003e\n\u003cp\u003eKit contents:\u003cbr\u003e Qty 1 - HL2500S - HydraLine 2500mm lead line with straight ends. \u003cbr\u003e Qty 1 - HL1000S - HydraLine 1000mm brake line with straight ends.\u003cbr\u003e Qty 1 - HL500S - HydraLine 500mm brake line with straight ends.\u003cbr\u003e Qty 2 - HL1200R - HydraLine 1200mm brake line with a 90 degree end\u003cbr\u003e Qty 2 - HL500R - HydraLine 500mm brake line with a 90 degree end\u003cbr\u003e Qty 3 - HU3 - 3 way brass tee for 3\/16th tube\u003c\/p\u003e\n\u003cp\u003eGenuine HydraLine contains the brand name on the braided brake line.\u003cbr\u003e Meets Australian Standards and International standards.\u003cbr\u003e Regular maintenance including \"bleeding\" of hydraulic brake lines is required to ensure the life of your brake calipers, actuator and brake lines. \u003cbr\u003e All calipers should be supplied with their own brake line union. If you do not have this union please purchase:\u003cbr\u003e HU4 - for Trojan, Alko, Meher, Trigg and Ark calipers\u003cbr\u003e HU5-M10 - for PBR type 1 and 2 calipers\u003cbr\u003e CW1 - Copper washer is required for use with both HU4 and HU5-M10\u003c\/p\u003e"}
Hydraline kit 2500mm tandem axle diagram

Tandem axle HydraLine kit with 2500mm lead line

$187.00 incl. GST

HydraLine is available in kit form for different length trailers, campers, caravans. The 2500mm tandem axle Hydraline kit is suited for large box trailers, campers and boat trailers with tandem hydraulic brakes. HydraLine is a flexible stainless steel braided brake hose designed to outlast conventional steel brake tubing and takes about 1/5th of...


More Info
{"id":682512744491,"title":"Tandem axle HydraLine kit with 3500mm lead line","handle":"tandem-axle-hydraline-kit-3500mm-lead-line","description":"\u003cp\u003eHydraLine is available in kit form for different length boat trailers, campers, caravans. The 3500mm tandem axle Hydraline kit is suited for large box trailers, camper, caravans and boat trailers up to 6 metres (20ft) with tandem hydraulic brakes.\u003c\/p\u003e\n\u003cp\u003eHydraLine is a flexible stainless steel braided brake hose designed to outlast conventional steel brake tubing and takes about 1\/5th of the time to fit. There are also less joins than conventional brake tubing therefore adding to the strength and durability. Made from braided stainless steel with a hardened Teflon inner tube and stainless end fittings that are already flared to seat in an inverted flare of a hydraulic union attached to the brake caliper, tee piece or to a hydraulic actuator. The Teflon inner tube limits the chance of swelling under hydraulic pressure compared to rubber brake hose. Hydraline meets Australian and international standards SAE1401J and USA DOT standards. Comes with a 1 year limited warranty.\u003cbr\u003e HydraLine comes with straight ends for lead lines, for the length of the trailer to the axle; and also 90 degree right angle fittings to fit into calipers in the shorter lengths. \u003cbr\u003e Fitting up the flexible brake line on your camper, caravan or trailer can be done in two ways: by sliding the flexible line up the box section of the trailer and pulling through holes where required, making a neater finish to the trailer; or by utilising P-clips to fasten the Hydraline to the \"i\" beam, box or C section of the trailer chassis.\u003c\/p\u003e\n\u003cp\u003eKit contents:\u003cbr\u003e Qty 1 - HL3500S - HydraLine 3500mm lead line with straight ends. \u003cbr\u003e Qty 1 - HL1000S - HydraLine 1000mm brake line with straight ends.\u003cbr\u003e Qty 1 - HL500S - HydraLine 500mm brake line with straight ends.\u003cbr\u003e Qty 2 - HL1800R - HydraLine 18200mm brake line with a 90 degree end\u003cbr\u003e Qty 2 - HL500R - HydraLine 500mm brake line with a 90 degree end\u003cbr\u003e Qty 3 - HU3 - 3 way brass tee for 3\/16th tube\u003c\/p\u003e\n\u003cp\u003eGenuine HydraLine contains the brand name on the braided brake line.\u003cbr\u003e Meets Australian Standards and International standards.\u003cbr\u003e Regular maintenance including \"bleeding\" of hydraulic brake lines is required to ensure the life of your brake calipers, actuator and brake lines.\u003cbr\u003e All calipers should be supplied with their own brake line union. If you do not have this union please purchase:\u003cbr\u003e HU4 - for Trojan, Alko, Meher, Trigg and Ark calipers\u003cbr\u003e HU5-M10 - for PBR type 1 and 2 calipers\u003cbr\u003e CW1 - Copper washer is required for use with both HU4 and HU5-M10\u003c\/p\u003e","published_at":"2018-05-17T10:51:10+10:00","created_at":"2018-01-03T14:34:23+10:00","vendor":"Trailer Spares Direct","type":"HydraLine","tags":["brake fittings","Hydraline","Hydraulic brake","Trailer brakes"],"price":21450,"price_min":21450,"price_max":21450,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":13017407586347,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"HL3500-2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Tandem axle HydraLine kit with 3500mm lead line","public_title":null,"options":["Default Title"],"price":21450,"weight":980,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/HL3500-2_a8ba86ee-edd4-49b6-8440-a2a1b34fed54.jpg?v=1520837173","\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/HYDRAline_2_84d9ad6d-ac89-4a80-983c-91a0cdca63f4.jpg?v=1535351653","\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/Hydraline_ends_c6efa458-6004-4561-837a-50f9b735334b.jpg?v=1535598259","\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/HL_ENDS_3315daaa-d111-4a7b-8887-e0027c368123.jpg?v=1535598639"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/HL3500-2_a8ba86ee-edd4-49b6-8440-a2a1b34fed54.jpg?v=1520837173","options":["Title"],"content":"\u003cp\u003eHydraLine is available in kit form for different length boat trailers, campers, caravans. The 3500mm tandem axle Hydraline kit is suited for large box trailers, camper, caravans and boat trailers up to 6 metres (20ft) with tandem hydraulic brakes.\u003c\/p\u003e\n\u003cp\u003eHydraLine is a flexible stainless steel braided brake hose designed to outlast conventional steel brake tubing and takes about 1\/5th of the time to fit. There are also less joins than conventional brake tubing therefore adding to the strength and durability. Made from braided stainless steel with a hardened Teflon inner tube and stainless end fittings that are already flared to seat in an inverted flare of a hydraulic union attached to the brake caliper, tee piece or to a hydraulic actuator. The Teflon inner tube limits the chance of swelling under hydraulic pressure compared to rubber brake hose. Hydraline meets Australian and international standards SAE1401J and USA DOT standards. Comes with a 1 year limited warranty.\u003cbr\u003e HydraLine comes with straight ends for lead lines, for the length of the trailer to the axle; and also 90 degree right angle fittings to fit into calipers in the shorter lengths. \u003cbr\u003e Fitting up the flexible brake line on your camper, caravan or trailer can be done in two ways: by sliding the flexible line up the box section of the trailer and pulling through holes where required, making a neater finish to the trailer; or by utilising P-clips to fasten the Hydraline to the \"i\" beam, box or C section of the trailer chassis.\u003c\/p\u003e\n\u003cp\u003eKit contents:\u003cbr\u003e Qty 1 - HL3500S - HydraLine 3500mm lead line with straight ends. \u003cbr\u003e Qty 1 - HL1000S - HydraLine 1000mm brake line with straight ends.\u003cbr\u003e Qty 1 - HL500S - HydraLine 500mm brake line with straight ends.\u003cbr\u003e Qty 2 - HL1800R - HydraLine 18200mm brake line with a 90 degree end\u003cbr\u003e Qty 2 - HL500R - HydraLine 500mm brake line with a 90 degree end\u003cbr\u003e Qty 3 - HU3 - 3 way brass tee for 3\/16th tube\u003c\/p\u003e\n\u003cp\u003eGenuine HydraLine contains the brand name on the braided brake line.\u003cbr\u003e Meets Australian Standards and International standards.\u003cbr\u003e Regular maintenance including \"bleeding\" of hydraulic brake lines is required to ensure the life of your brake calipers, actuator and brake lines.\u003cbr\u003e All calipers should be supplied with their own brake line union. If you do not have this union please purchase:\u003cbr\u003e HU4 - for Trojan, Alko, Meher, Trigg and Ark calipers\u003cbr\u003e HU5-M10 - for PBR type 1 and 2 calipers\u003cbr\u003e CW1 - Copper washer is required for use with both HU4 and HU5-M10\u003c\/p\u003e"}
Hydraline kit 3500mm tandem axle diagram

Tandem axle HydraLine kit with 3500mm lead line

$214.50 incl. GST

HydraLine is available in kit form for different length boat trailers, campers, caravans. The 3500mm tandem axle Hydraline kit is suited for large box trailers, camper, caravans and boat trailers up to 6 metres (20ft) with tandem hydraulic brakes. HydraLine is a flexible stainless steel braided brake hose designed to outlast conventional steel b...


More Info
{"id":682513530923,"title":"Tandem axle HydraLine kit with 5500mm lead line","handle":"tandem-axle-hydraline-kit-5500mm-lead-line","description":"\u003cp\u003eHydraLine is available in kit form for different length trailers, campers, caravans. The 5500mm tandem axle Hydraline kit is suited for caravans and boat trailers up to 7 metres (23 ft) with tandem hydraulic brakes.\u003c\/p\u003e\n\u003cp\u003eHydraLine is a flexible stainless steel braided brake hose designed to outlast conventional steel brake tubing and takes about 1\/5th of the time to fit. There are also less joins than conventional brake tubing therefore adding to the strength and durability. Made from braided stainless steel with a hardened Teflon inner tube and stainless end fittings that are already flared to seat in an inverted flare of a hydraulic union attached to the brake caliper, tee piece or to a hydraulic actuator. The Teflon inner tube limits the chance of swelling under hydraulic pressure compared to rubber brake hose. Hydraline meets Australian and international standards SAE1401J and USA DOT standards. Comes with a 1 year limited warranty.\u003cbr\u003e HydraLine comes with straight ends for lead lines, for the length of the trailer to the axle; and also 90 degree right angle fittings to fit into calipers in the shorter lengths. \u003cbr\u003e Fitting up the flexible brake line on your camper, caravan or trailer can be done in two ways: by sliding the flexible line up the box section of the trailer and pulling through holes where required, making a neater finish to the trailer; or by utilising P-clips to fasten the Hydraline to the \"i\" beam, box or C section of the trailer chassis.\u003c\/p\u003e\n\u003cp\u003eKit contents:\u003cbr\u003e Qty 1 - HL5500S - HydraLine 5500mm lead line with straight ends. \u003cbr\u003e Qty 1 - HL1000S - HydraLine 1000mm brake line with straight ends. \u003cbr\u003e Qty 1 - HL500S - HydraLine 500mm brake line with straight ends. \u003cbr\u003e Qty 2 - HL1800R - HydraLine 1800mm brake line with a 90 degree end\u003cbr\u003e Qty 2 - HL500R - HydraLine 500mm brake line with a 90 degree end\u003cbr\u003e Qty 3 - HU3 - 3 way brass tee for 3\/16th tube\u003c\/p\u003e\n\u003cp\u003eGenuine HydraLine contains the brand name on the braided brake line.\u003cbr\u003e Meets Australian Standards and International standards.\u003cbr\u003e Regular maintenance including \"bleeding\" of hydraulic brake lines is required to ensure the life of your brake calipers, actuator and brake lines.\u003cbr\u003e All calipers should be supplied with their own brake line union. If you do not have this union please purchase:\u003cbr\u003e HU4 - for Trojan, Alko, Meher, Trigg and Ark calipers\u003cbr\u003e HU5-M10 - for PBR type 1 and 2 calipers\u003cbr\u003e CW1 - Copper washer is required for use with both HU4 and HU5-M10\u003c\/p\u003e","published_at":"2018-05-17T10:55:04+10:00","created_at":"2018-01-03T14:34:32+10:00","vendor":"Trailer Spares Direct","type":"HydraLine","tags":["brake fittings","Hydraline","Hydraulic brake","Trailer brakes"],"price":26950,"price_min":26950,"price_max":26950,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":13017407291435,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"HL5500-2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Tandem axle HydraLine kit with 5500mm lead line","public_title":null,"options":["Default Title"],"price":26950,"weight":1100,"compare_at_price":null,"inventory_quantity":21,"inventory_management":"shopify","inventory_policy":"deny","barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/HL5500-2_cf4883cd-6e36-409c-80f1-7daf5c9a29ea.jpg?v=1520837164","\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/HYDRAline_2_cb87ac46-d179-4b1e-ba9e-85995e8f2c71.jpg?v=1535351796","\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/Hydraline_ends_49fad989-706d-45cd-8aa9-9c35592c112a.jpg?v=1535598276","\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/HL_ENDS_160b4ae6-d7da-4d52-8808-826b9bc391df.jpg?v=1535598671"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/HL5500-2_cf4883cd-6e36-409c-80f1-7daf5c9a29ea.jpg?v=1520837164","options":["Title"],"content":"\u003cp\u003eHydraLine is available in kit form for different length trailers, campers, caravans. The 5500mm tandem axle Hydraline kit is suited for caravans and boat trailers up to 7 metres (23 ft) with tandem hydraulic brakes.\u003c\/p\u003e\n\u003cp\u003eHydraLine is a flexible stainless steel braided brake hose designed to outlast conventional steel brake tubing and takes about 1\/5th of the time to fit. There are also less joins than conventional brake tubing therefore adding to the strength and durability. Made from braided stainless steel with a hardened Teflon inner tube and stainless end fittings that are already flared to seat in an inverted flare of a hydraulic union attached to the brake caliper, tee piece or to a hydraulic actuator. The Teflon inner tube limits the chance of swelling under hydraulic pressure compared to rubber brake hose. Hydraline meets Australian and international standards SAE1401J and USA DOT standards. Comes with a 1 year limited warranty.\u003cbr\u003e HydraLine comes with straight ends for lead lines, for the length of the trailer to the axle; and also 90 degree right angle fittings to fit into calipers in the shorter lengths. \u003cbr\u003e Fitting up the flexible brake line on your camper, caravan or trailer can be done in two ways: by sliding the flexible line up the box section of the trailer and pulling through holes where required, making a neater finish to the trailer; or by utilising P-clips to fasten the Hydraline to the \"i\" beam, box or C section of the trailer chassis.\u003c\/p\u003e\n\u003cp\u003eKit contents:\u003cbr\u003e Qty 1 - HL5500S - HydraLine 5500mm lead line with straight ends. \u003cbr\u003e Qty 1 - HL1000S - HydraLine 1000mm brake line with straight ends. \u003cbr\u003e Qty 1 - HL500S - HydraLine 500mm brake line with straight ends. \u003cbr\u003e Qty 2 - HL1800R - HydraLine 1800mm brake line with a 90 degree end\u003cbr\u003e Qty 2 - HL500R - HydraLine 500mm brake line with a 90 degree end\u003cbr\u003e Qty 3 - HU3 - 3 way brass tee for 3\/16th tube\u003c\/p\u003e\n\u003cp\u003eGenuine HydraLine contains the brand name on the braided brake line.\u003cbr\u003e Meets Australian Standards and International standards.\u003cbr\u003e Regular maintenance including \"bleeding\" of hydraulic brake lines is required to ensure the life of your brake calipers, actuator and brake lines.\u003cbr\u003e All calipers should be supplied with their own brake line union. If you do not have this union please purchase:\u003cbr\u003e HU4 - for Trojan, Alko, Meher, Trigg and Ark calipers\u003cbr\u003e HU5-M10 - for PBR type 1 and 2 calipers\u003cbr\u003e CW1 - Copper washer is required for use with both HU4 and HU5-M10\u003c\/p\u003e"}
Hydraline kit 5500mm tandem axle diagram

Tandem axle HydraLine kit with 5500mm lead line

$269.50 incl. GST

HydraLine is available in kit form for different length trailers, campers, caravans. The 5500mm tandem axle Hydraline kit is suited for caravans and boat trailers up to 7 metres (23 ft) with tandem hydraulic brakes. HydraLine is a flexible stainless steel braided brake hose designed to outlast conventional steel brake tubing and takes about 1/5t...


More Info