Products

Sort by:
Filter
1000mm HydraLine brake hose - straight end

HydraLine

$30.80 incl. GST
{"id":682512121899,"title":"1000mm HydraLine brake hose - straight end","handle":"1000mm-hydraline-straight-brake-hose","description":"\u003cp\u003eHydraLine is a flexible stainless steel braided brake hose designed to outlast conventional steel brake tubing and takes about 1\/5th of the time to fit. There are also less joins than conventional brake tubing therefore adding to the strength and durability. \u003cbr\u003eMade from braided stainless steel with a hardened Teflon inner tube and stainless end fittings that are already flared to seat in an inverted flare of a hydraulic union attached to the brake caliper, tee piece or to a hydraulic actuator. The Teflon inner tube limits the chance of swelling under hydraulic pressure compared to rubber brake hose. Hydraline meets Australian and international standards SAE1401J and USA DOT standards. Comes with a 1 year limited warranty.\u003cbr\u003e HydraLine comes with straight ends for lead lines, for the length of the trailer to the axle; and also 90 degree right angle fittings to fit into calipers in the shorter lengths. \u003cbr\u003e Fitting up the flexible brake line on your camper, caravan or trailer can be done in two ways: by sliding the flexible line up the box section of the trailer and pulling through holes where required, making a neater finish to the trailer; or by utilising P-clips to fasten the Hydraline to the \"i\" beam, box or C section of the trailer chassis.\u003c\/p\u003e\n\u003cp\u003eGenuine HydraLine contains the brand name on the braided brake line.\u003cbr\u003e Length: 1000mm braided brake hose \u003cbr\u003e End fittings: stainless straight, flared for fitting to inverted flare.\u003cbr\u003e Meets Australian Standards and International standards.\u003c\/p\u003e\n\u003cp\u003eRegular maintenance including \"bleeding\" of hydraulic brake lines is required to ensure the life of your brake calipers, actuator and brake lines.\u003c\/p\u003e\n\u003cp\u003eAll calipers should be supplied with their own brake line union. If you do not have this union please purchase:\u003cbr\u003e HU4 - for Trojan, Alko, Meher, Trigg and Ark calipers\u003cbr\u003e HU5-M10 - for PBR type 1 and 2 calipers\u003cbr\u003e CW1 - Copper washer is required for use with both HU4 and HU5-M10\u003c\/p\u003e","published_at":"2018-04-30T17:18:11+10:00","created_at":"2018-01-03T14:34:16+10:00","vendor":"Trailer Spares Direct","type":"HydraLine","tags":["brake fittings","Hydraline","Hydraulic brake","Trailer brakes"],"price":3080,"price_min":3080,"price_max":3080,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":13017407848491,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"HL1000S","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"1000mm HydraLine brake hose - straight end","public_title":null,"options":["Default Title"],"price":3080,"weight":90,"compare_at_price":null,"inventory_quantity":340,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/HYDRAline_2.jpg?v=1547351347","\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/Hydraline_ends.jpg?v=1547351347","\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/HL_ENDS.jpg?v=1547351347"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/HYDRAline_2.jpg?v=1547351347","options":["Title"],"content":"\u003cp\u003eHydraLine is a flexible stainless steel braided brake hose designed to outlast conventional steel brake tubing and takes about 1\/5th of the time to fit. There are also less joins than conventional brake tubing therefore adding to the strength and durability. \u003cbr\u003eMade from braided stainless steel with a hardened Teflon inner tube and stainless end fittings that are already flared to seat in an inverted flare of a hydraulic union attached to the brake caliper, tee piece or to a hydraulic actuator. The Teflon inner tube limits the chance of swelling under hydraulic pressure compared to rubber brake hose. Hydraline meets Australian and international standards SAE1401J and USA DOT standards. Comes with a 1 year limited warranty.\u003cbr\u003e HydraLine comes with straight ends for lead lines, for the length of the trailer to the axle; and also 90 degree right angle fittings to fit into calipers in the shorter lengths. \u003cbr\u003e Fitting up the flexible brake line on your camper, caravan or trailer can be done in two ways: by sliding the flexible line up the box section of the trailer and pulling through holes where required, making a neater finish to the trailer; or by utilising P-clips to fasten the Hydraline to the \"i\" beam, box or C section of the trailer chassis.\u003c\/p\u003e\n\u003cp\u003eGenuine HydraLine contains the brand name on the braided brake line.\u003cbr\u003e Length: 1000mm braided brake hose \u003cbr\u003e End fittings: stainless straight, flared for fitting to inverted flare.\u003cbr\u003e Meets Australian Standards and International standards.\u003c\/p\u003e\n\u003cp\u003eRegular maintenance including \"bleeding\" of hydraulic brake lines is required to ensure the life of your brake calipers, actuator and brake lines.\u003c\/p\u003e\n\u003cp\u003eAll calipers should be supplied with their own brake line union. If you do not have this union please purchase:\u003cbr\u003e HU4 - for Trojan, Alko, Meher, Trigg and Ark calipers\u003cbr\u003e HU5-M10 - for PBR type 1 and 2 calipers\u003cbr\u003e CW1 - Copper washer is required for use with both HU4 and HU5-M10\u003c\/p\u003e"}
1000mm HydraLine brake hose - straight end

1000mm HydraLine brake hose - straight end

$30.80 incl. GST

HydraLine is a flexible stainless steel braided brake hose designed to outlast conventional steel brake tubing and takes about 1/5th of the time to fit. There are also less joins than conventional brake tubing therefore adding to the strength and durability. Made from braided stainless steel with a hardened Teflon inner tube and stainless end fi...


More Info
{"id":682512187435,"title":"1200mm HydraLine brake hose - 90 degree end fitting","handle":"1200mm-hydraline-brake-hose-90-degree-end","description":"\u003cp\u003eHydraLine is a flexible stainless steel braided brake hose designed to outlast conventional steel brake tubing and takes about 1\/5th of the time to fit. There are also less joins than conventional brake tubing therefore adding to the strength and durability. Made from braided stainless steel with a hardened Teflon inner tube and stainless end fittings that are already flared to seat in an inverted flare of a hydraulic union attached to the brake caliper, tee piece or to a hydraulic actuator. The Teflon inner tube limits the chance of swelling under hydraulic pressure compared to rubber brake hose. Hydraline meets Australian and international standards SAE1401J and USA DOT standards. Comes with a 1 year limited warranty.\u003cbr\u003e HydraLine comes with straight ends for lead lines, for the length of the trailer to the axle; and also 90 degree right angle fittings to fit into calipers in the shorter lengths. \u003cbr\u003e Fitting up the flexible brake line on your camper, caravan or trailer can be done in two ways: by sliding the flexible line up the box section of the trailer and pulling through holes where required, making a neater finish to the trailer; or by utilising P-clips to fasten the Hydraline to the \"i\" beam, box or C section of the trailer chassis.\u003c\/p\u003e\n\u003cp\u003eGenuine HydraLine contains the brand name on the braided brake line.\u003cbr\u003e Length: 1200mm braided brake hose \u003cbr\u003e End fittings: one end stainless straight, flared for fitting to inverted flare; one end stainless 90 degree right angle, flared for fitting to inverted flare\u003cbr\u003e Meets Australian Standards and International standards.\u003c\/p\u003e\n\u003cp\u003eRegular maintenance including \"bleeding\" of hydraulic brake lines is required to ensure the life of your brake calipers, actuator and brake lines. \u003cbr\u003e All calipers should be supplied with their own brake line union. If you do not have this union please purchase:\u003cbr\u003e HU4 - for Trojan, Alko, Meher, Trigg and Ark calipers\u003cbr\u003e HU5-M10 - for PBR type 1 and 2 calipers\u003cbr\u003e CW1 - Copper washer is required for use with both HU4 and HU5-M10\u003c\/p\u003e","published_at":"2018-05-02T15:45:34+10:00","created_at":"2018-01-03T14:34:16+10:00","vendor":"Trailer Spares Direct","type":"HydraLine","tags":["brake fittings","Hydraline","Hydraulic brake","Trailer brakes"],"price":3300,"price_min":3300,"price_max":3300,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":13017407815723,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"HL1200R","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"1200mm HydraLine brake hose - 90 degree end fitting","public_title":null,"options":["Default Title"],"price":3300,"weight":140,"compare_at_price":null,"inventory_quantity":116,"inventory_management":"shopify","inventory_policy":"deny","barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/HYDRAline_2_05cad86a-6f5a-44da-84ee-a81283067eb7.jpg?v=1547351346","\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/Hydraline_ends_4f2e68e7-7e2d-4c46-bcdb-f6708c5ec6eb.jpg?v=1547351346","\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/HL_ENDS_9f077941-811e-4f73-a58c-9c927be1b566.jpg?v=1547351346"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/HYDRAline_2_05cad86a-6f5a-44da-84ee-a81283067eb7.jpg?v=1547351346","options":["Title"],"content":"\u003cp\u003eHydraLine is a flexible stainless steel braided brake hose designed to outlast conventional steel brake tubing and takes about 1\/5th of the time to fit. There are also less joins than conventional brake tubing therefore adding to the strength and durability. Made from braided stainless steel with a hardened Teflon inner tube and stainless end fittings that are already flared to seat in an inverted flare of a hydraulic union attached to the brake caliper, tee piece or to a hydraulic actuator. The Teflon inner tube limits the chance of swelling under hydraulic pressure compared to rubber brake hose. Hydraline meets Australian and international standards SAE1401J and USA DOT standards. Comes with a 1 year limited warranty.\u003cbr\u003e HydraLine comes with straight ends for lead lines, for the length of the trailer to the axle; and also 90 degree right angle fittings to fit into calipers in the shorter lengths. \u003cbr\u003e Fitting up the flexible brake line on your camper, caravan or trailer can be done in two ways: by sliding the flexible line up the box section of the trailer and pulling through holes where required, making a neater finish to the trailer; or by utilising P-clips to fasten the Hydraline to the \"i\" beam, box or C section of the trailer chassis.\u003c\/p\u003e\n\u003cp\u003eGenuine HydraLine contains the brand name on the braided brake line.\u003cbr\u003e Length: 1200mm braided brake hose \u003cbr\u003e End fittings: one end stainless straight, flared for fitting to inverted flare; one end stainless 90 degree right angle, flared for fitting to inverted flare\u003cbr\u003e Meets Australian Standards and International standards.\u003c\/p\u003e\n\u003cp\u003eRegular maintenance including \"bleeding\" of hydraulic brake lines is required to ensure the life of your brake calipers, actuator and brake lines. \u003cbr\u003e All calipers should be supplied with their own brake line union. If you do not have this union please purchase:\u003cbr\u003e HU4 - for Trojan, Alko, Meher, Trigg and Ark calipers\u003cbr\u003e HU5-M10 - for PBR type 1 and 2 calipers\u003cbr\u003e CW1 - Copper washer is required for use with both HU4 and HU5-M10\u003c\/p\u003e"}
1200mm HydraLine brake hose - 90 degree end fitting

1200mm HydraLine brake hose - 90 degree end fitting

$33.00 incl. GST

HydraLine is a flexible stainless steel braided brake hose designed to outlast conventional steel brake tubing and takes about 1/5th of the time to fit. There are also less joins than conventional brake tubing therefore adding to the strength and durability. Made from braided stainless steel with a hardened Teflon inner tube and stainless end fi...


More Info
{"id":682512252971,"title":"1800mm HydraLine brake hose - 90 degree end fitting","handle":"1800mm-hydraline-brake-hose-90-degree-end","description":"\u003cp\u003eHydraLine is a flexible stainless steel braided brake hose designed to outlast conventional steel brake tubing and takes about 1\/5th of the time to fit. There are also less joins than conventional brake tubing therefore adding to the strength and durability. Made from braided stainless steel with a hardened Teflon inner tube and stainless end fittings that are already flared to seat in an inverted flare of a hydraulic union attached to the brake caliper, tee piece or to a hydraulic actuator. The Teflon inner tube limits the chance of swelling under hydraulic pressure compared to rubber brake hose. Hydraline meets Australian and international standards SAE1401J and USA DOT standards. Comes with a 1 year limited warranty.\u003cbr\u003e HydraLine comes with straight ends for lead lines, for the length of the trailer to the axle; and also 90 degree right angle fittings to fit into calipers in the shorter lengths. \u003cbr\u003e Fitting up the flexible brake line on your camper, caravan or trailer can be done in two ways: by sliding the flexible line up the box section of the trailer and pulling through holes where required, making a neater finish to the trailer; or by utilising P-clips to fasten the Hydraline to the \"i\" beam, box or C section of the trailer chassis.\u003c\/p\u003e\n\u003cp\u003eGenuine HydraLine contains the brand name on the braided brake line.\u003cbr\u003e Length: 1800mm braided brake hose \u003cbr\u003e End fittings: one end stainless straight, flared for fitting to inverted flare; one end stainless 90 degree right angle, flared for fitting to inverted flare\u003cbr\u003e Meets Australian Standards and International standards.\u003c\/p\u003e\n\u003cp\u003eRegular maintenance including \"bleeding\" of hydraulic brake lines is required to ensure the life of your brake calipers, actuator and brake lines. \u003cbr\u003e All calipers should be supplied with their own brake line union. If you do not have this union please purchase:\u003cbr\u003e HU4 - for Trojan, Alko, Meher, Trigg and Ark calipers\u003cbr\u003e HU5-M10 - for PBR type 1 and 2 calipers\u003cbr\u003e CW1 - Copper washer is required for use with both HU4 and HU5-M10\u003c\/p\u003e","published_at":"2018-05-02T16:24:56+10:00","created_at":"2018-01-03T14:34:17+10:00","vendor":"Trailer Spares Direct","type":"HydraLine","tags":["brake fittings","Hydraline","Hydraulic brake","Trailer brakes"],"price":3850,"price_min":3850,"price_max":3850,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":13017407782955,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"HL1800R","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"1800mm HydraLine brake hose - 90 degree end fitting","public_title":null,"options":["Default Title"],"price":3850,"weight":140,"compare_at_price":null,"inventory_quantity":348,"inventory_management":"shopify","inventory_policy":"deny","barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/HYDRAline_2_37178914-403d-455c-a587-a8f65b9f8ece.jpg?v=1547351346","\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/Hydraline_ends_1e63bb27-e2bd-4a1b-91ac-2490a79c62e9.jpg?v=1547351346","\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/HL_ENDS_16429a4e-6f89-4c38-a476-72eab119815a.jpg?v=1547351346"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/HYDRAline_2_37178914-403d-455c-a587-a8f65b9f8ece.jpg?v=1547351346","options":["Title"],"content":"\u003cp\u003eHydraLine is a flexible stainless steel braided brake hose designed to outlast conventional steel brake tubing and takes about 1\/5th of the time to fit. There are also less joins than conventional brake tubing therefore adding to the strength and durability. Made from braided stainless steel with a hardened Teflon inner tube and stainless end fittings that are already flared to seat in an inverted flare of a hydraulic union attached to the brake caliper, tee piece or to a hydraulic actuator. The Teflon inner tube limits the chance of swelling under hydraulic pressure compared to rubber brake hose. Hydraline meets Australian and international standards SAE1401J and USA DOT standards. Comes with a 1 year limited warranty.\u003cbr\u003e HydraLine comes with straight ends for lead lines, for the length of the trailer to the axle; and also 90 degree right angle fittings to fit into calipers in the shorter lengths. \u003cbr\u003e Fitting up the flexible brake line on your camper, caravan or trailer can be done in two ways: by sliding the flexible line up the box section of the trailer and pulling through holes where required, making a neater finish to the trailer; or by utilising P-clips to fasten the Hydraline to the \"i\" beam, box or C section of the trailer chassis.\u003c\/p\u003e\n\u003cp\u003eGenuine HydraLine contains the brand name on the braided brake line.\u003cbr\u003e Length: 1800mm braided brake hose \u003cbr\u003e End fittings: one end stainless straight, flared for fitting to inverted flare; one end stainless 90 degree right angle, flared for fitting to inverted flare\u003cbr\u003e Meets Australian Standards and International standards.\u003c\/p\u003e\n\u003cp\u003eRegular maintenance including \"bleeding\" of hydraulic brake lines is required to ensure the life of your brake calipers, actuator and brake lines. \u003cbr\u003e All calipers should be supplied with their own brake line union. If you do not have this union please purchase:\u003cbr\u003e HU4 - for Trojan, Alko, Meher, Trigg and Ark calipers\u003cbr\u003e HU5-M10 - for PBR type 1 and 2 calipers\u003cbr\u003e CW1 - Copper washer is required for use with both HU4 and HU5-M10\u003c\/p\u003e"}
1800mm HydraLine brake hose - 90 degree end fitting

1800mm HydraLine brake hose - 90 degree end fitting

$38.50 incl. GST

HydraLine is a flexible stainless steel braided brake hose designed to outlast conventional steel brake tubing and takes about 1/5th of the time to fit. There are also less joins than conventional brake tubing therefore adding to the strength and durability. Made from braided stainless steel with a hardened Teflon inner tube and stainless end fi...


More Info
{"id":682515202091,"title":"2 way hydraulic brass joiner suit 3\/16 inch tube","handle":"2-way-hydraulic-brass-joiner","description":"\u003cp\u003e2 way brass hydraulic joiner suit 3\/16 inch tube already with inverted flare\u003c\/p\u003e","published_at":"2018-05-02T16:36:56+10:00","created_at":"2018-01-03T14:34:45+10:00","vendor":"Trailer Spares Direct","type":"HydraLine","tags":["brake fittings","Hydraline","Hydraulic brake","Trailer brakes"],"price":440,"price_min":440,"price_max":440,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":13017406898219,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"HU2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"2 way hydraulic brass joiner suit 3\/16 inch tube","public_title":null,"options":["Default Title"],"price":440,"weight":10,"compare_at_price":null,"inventory_quantity":1324,"inventory_management":"shopify","inventory_policy":"deny","barcode":null}],"images":[],"featured_image":null,"options":["Title"],"content":"\u003cp\u003e2 way brass hydraulic joiner suit 3\/16 inch tube already with inverted flare\u003c\/p\u003e"}

2 way hydraulic brass joiner suit 3/16 inch tube

$4.40 incl. GST

2 way brass hydraulic joiner suit 3/16 inch tube already with inverted flare


More Info
{"id":682512318507,"title":"2000mm HydraLine brake hose - 90 degree end fitting","handle":"2000mm-hydraline-brake-hose-90-degree-end","description":"\u003cp\u003eHydraLine is a flexible stainless steel braided brake hose designed to outlast conventional steel brake tubing and takes about 1\/5th of the time to fit. There are also less joins than conventional brake tubing therefore adding to the strength and durability. Made from braided stainless steel with a hardened Teflon inner tube and stainless end fittings that are already flared to seat in an inverted flare of a hydraulic union attached to the brake caliper, tee piece or to a hydraulic actuator. The Teflon inner tube limits the chance of swelling under hydraulic pressure compared to rubber brake hose. Hydraline meets Australian and international standards SAE1401J and USA DOT standards. Comes with a 1 year limited warranty.\u003cbr\u003e HydraLine comes with straight ends for lead lines, for the length of the trailer to the axle; and also 90 degree right angle fittings to fit into calipers in the shorter lengths. \u003cbr\u003e Fitting up the flexible brake line on your camper, caravan or trailer can be done in two ways: by sliding the flexible line up the box section of the trailer and pulling through holes where required, making a neater finish to the trailer; or by utilising P-clips to fasten the Hydraline to the \"i\" beam, box or C section of the trailer chassis.\u003c\/p\u003e\n\u003cp\u003eGenuine HydraLine contains the brand name on the braided brake line.\u003cbr\u003e Length: 2000mm braided brake hose \u003cbr\u003e End fittings: one end stainless straight, flared for fitting to inverted flare; one end stainless 90 degree right angle, flared for fitting to inverted flare\u003cbr\u003e Meets Australian Standards and International standards.\u003c\/p\u003e\n\u003cp\u003eRegular maintenance including \"bleeding\" of hydraulic brake lines is required to ensure the life of your brake calipers, actuator and brake lines. \u003cbr\u003e All calipers should be supplied with their own brake line union. If you do not have this union please purchase:\u003cbr\u003e HU4 - for Trojan, Alko, Meher, Trigg and Ark calipers\u003cbr\u003e HU5-M10 - for PBR type 1 and 2 calipers\u003cbr\u003e CW1 - Copper washer is required for use with both HU4 and HU5-M10\u003c\/p\u003e","published_at":"2018-05-02T16:41:14+10:00","created_at":"2018-01-03T14:34:17+10:00","vendor":"Trailer Spares Direct","type":"HydraLine","tags":["brake fittings","Hydraline","Hydraulic brake","Trailer brakes"],"price":4180,"price_min":4180,"price_max":4180,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":13017407750187,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"HL2000R","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"2000mm HydraLine brake hose - 90 degree end fitting","public_title":null,"options":["Default Title"],"price":4180,"weight":150,"compare_at_price":null,"inventory_quantity":184,"inventory_management":"shopify","inventory_policy":"deny","barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/HYDRAline_2_98d2739e-d81c-46e7-9df3-28ac00ff4930.jpg?v=1547351346","\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/Hydraline_ends_40987671-0d5c-4b93-ad81-e39573e9d2df.jpg?v=1547351346","\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/HL_ENDS_383c937f-2cce-495e-af3c-e8feb98e7005.jpg?v=1547351346"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/HYDRAline_2_98d2739e-d81c-46e7-9df3-28ac00ff4930.jpg?v=1547351346","options":["Title"],"content":"\u003cp\u003eHydraLine is a flexible stainless steel braided brake hose designed to outlast conventional steel brake tubing and takes about 1\/5th of the time to fit. There are also less joins than conventional brake tubing therefore adding to the strength and durability. Made from braided stainless steel with a hardened Teflon inner tube and stainless end fittings that are already flared to seat in an inverted flare of a hydraulic union attached to the brake caliper, tee piece or to a hydraulic actuator. The Teflon inner tube limits the chance of swelling under hydraulic pressure compared to rubber brake hose. Hydraline meets Australian and international standards SAE1401J and USA DOT standards. Comes with a 1 year limited warranty.\u003cbr\u003e HydraLine comes with straight ends for lead lines, for the length of the trailer to the axle; and also 90 degree right angle fittings to fit into calipers in the shorter lengths. \u003cbr\u003e Fitting up the flexible brake line on your camper, caravan or trailer can be done in two ways: by sliding the flexible line up the box section of the trailer and pulling through holes where required, making a neater finish to the trailer; or by utilising P-clips to fasten the Hydraline to the \"i\" beam, box or C section of the trailer chassis.\u003c\/p\u003e\n\u003cp\u003eGenuine HydraLine contains the brand name on the braided brake line.\u003cbr\u003e Length: 2000mm braided brake hose \u003cbr\u003e End fittings: one end stainless straight, flared for fitting to inverted flare; one end stainless 90 degree right angle, flared for fitting to inverted flare\u003cbr\u003e Meets Australian Standards and International standards.\u003c\/p\u003e\n\u003cp\u003eRegular maintenance including \"bleeding\" of hydraulic brake lines is required to ensure the life of your brake calipers, actuator and brake lines. \u003cbr\u003e All calipers should be supplied with their own brake line union. If you do not have this union please purchase:\u003cbr\u003e HU4 - for Trojan, Alko, Meher, Trigg and Ark calipers\u003cbr\u003e HU5-M10 - for PBR type 1 and 2 calipers\u003cbr\u003e CW1 - Copper washer is required for use with both HU4 and HU5-M10\u003c\/p\u003e"}
2000mm HydraLine brake hose - 90 degree end fitting

2000mm HydraLine brake hose - 90 degree end fitting

$41.80 incl. GST

HydraLine is a flexible stainless steel braided brake hose designed to outlast conventional steel brake tubing and takes about 1/5th of the time to fit. There are also less joins than conventional brake tubing therefore adding to the strength and durability. Made from braided stainless steel with a hardened Teflon inner tube and stainless end fi...


More Info
{"id":682512580651,"title":"2500mm HydraLine brake hose - straight end fittings","handle":"2500mm-hydraline-straight-brake-hose","description":"\u003cp\u003eHydraLine is a flexible stainless steel braided brake hose designed to outlast conventional steel brake tubing and takes about 1\/5th of the time to fit. There are also less joins than conventional brake tubing therefore adding to the strength and durability. Made from braided stainless steel with a hardened Teflon inner tube and stainless end fittings that are already flared to seat in an inverted flare of a hydraulic union attached to the brake caliper, tee piece or to a hydraulic actuator. The Teflon inner tube limits the chance of swelling under hydraulic pressure compared to rubber brake hose. Hydraline meets Australian and international standards SAE1401J and USA DOT standards. Comes with a 1 year limited warranty.\u003cbr\u003e HydraLine comes with straight ends for lead lines, for the length of the trailer to the axle; and also 90 degree right angle fittings to fit into calipers in the shorter lengths. \u003cbr\u003e Fitting up the flexible brake line on your camper, caravan or trailer can be done in two ways: by sliding the flexible line up the box section of the trailer and pulling through holes where required, making a neater finish to the trailer; or by utilising P-clips to fasten the Hydraline to the \"i\" beam, box or C section of the trailer chassis.\u003c\/p\u003e\n\u003cp\u003eGenuine HydraLine contains the brand name on the braided brake line.\u003cbr\u003e Length: 2500mm braided brake hose \u003cbr\u003e End fittings: stainless straight, flared for fitting to inverted flare.\u003cbr\u003e Meets Australian Standards and International standards.\u003c\/p\u003e\n\u003cp\u003eRegular maintenance including \"bleeding\" of hydraulic brake lines is required to ensure the life of your brake calipers, actuator and brake lines. \u003cbr\u003e All calipers should be supplied with their own brake line union. If you do not have this union please purchase:\u003cbr\u003e HU4 - for Trojan, Alko, Meher, Trigg and Ark calipers\u003cbr\u003e HU5-M10 - for PBR type 1 and 2 calipers\u003cbr\u003e CW1 - Copper washer is required for use with both HU4 and HU5-M10\u003c\/p\u003e","published_at":"2018-05-02T16:45:35+10:00","created_at":"2018-01-03T14:34:21+10:00","vendor":"Trailer Spares Direct","type":"HydraLine","tags":["brake fittings","Hydraline","Hydraulic brake","Trailer brakes"],"price":4400,"price_min":4400,"price_max":4400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":13017407651883,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"HL2500S","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"2500mm HydraLine brake hose - straight end fittings","public_title":null,"options":["Default Title"],"price":4400,"weight":170,"compare_at_price":null,"inventory_quantity":63,"inventory_management":"shopify","inventory_policy":"deny","barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/HYDRAline_2_204f3428-5d5a-4cdd-a8e8-b398795f2d38.jpg?v=1547351345","\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/Hydraline_ends_c28b0272-9793-44b2-85bc-b51a2ec6cab2.jpg?v=1547351345","\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/HL_ENDS_d7b49555-9e58-47af-a372-5e2fa94885a5.jpg?v=1547351345"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/HYDRAline_2_204f3428-5d5a-4cdd-a8e8-b398795f2d38.jpg?v=1547351345","options":["Title"],"content":"\u003cp\u003eHydraLine is a flexible stainless steel braided brake hose designed to outlast conventional steel brake tubing and takes about 1\/5th of the time to fit. There are also less joins than conventional brake tubing therefore adding to the strength and durability. Made from braided stainless steel with a hardened Teflon inner tube and stainless end fittings that are already flared to seat in an inverted flare of a hydraulic union attached to the brake caliper, tee piece or to a hydraulic actuator. The Teflon inner tube limits the chance of swelling under hydraulic pressure compared to rubber brake hose. Hydraline meets Australian and international standards SAE1401J and USA DOT standards. Comes with a 1 year limited warranty.\u003cbr\u003e HydraLine comes with straight ends for lead lines, for the length of the trailer to the axle; and also 90 degree right angle fittings to fit into calipers in the shorter lengths. \u003cbr\u003e Fitting up the flexible brake line on your camper, caravan or trailer can be done in two ways: by sliding the flexible line up the box section of the trailer and pulling through holes where required, making a neater finish to the trailer; or by utilising P-clips to fasten the Hydraline to the \"i\" beam, box or C section of the trailer chassis.\u003c\/p\u003e\n\u003cp\u003eGenuine HydraLine contains the brand name on the braided brake line.\u003cbr\u003e Length: 2500mm braided brake hose \u003cbr\u003e End fittings: stainless straight, flared for fitting to inverted flare.\u003cbr\u003e Meets Australian Standards and International standards.\u003c\/p\u003e\n\u003cp\u003eRegular maintenance including \"bleeding\" of hydraulic brake lines is required to ensure the life of your brake calipers, actuator and brake lines. \u003cbr\u003e All calipers should be supplied with their own brake line union. If you do not have this union please purchase:\u003cbr\u003e HU4 - for Trojan, Alko, Meher, Trigg and Ark calipers\u003cbr\u003e HU5-M10 - for PBR type 1 and 2 calipers\u003cbr\u003e CW1 - Copper washer is required for use with both HU4 and HU5-M10\u003c\/p\u003e"}
2500mm HydraLine brake hose - straight end fittings

2500mm HydraLine brake hose - straight end fittings

$44.00 incl. GST

HydraLine is a flexible stainless steel braided brake hose designed to outlast conventional steel brake tubing and takes about 1/5th of the time to fit. There are also less joins than conventional brake tubing therefore adding to the strength and durability. Made from braided stainless steel with a hardened Teflon inner tube and stainless end fi...


More Info
3 way brass tee suit 3/16 inch tube

HydraLine

$9.90 incl. GST
{"id":682554720299,"title":"3 way brass tee suit 3\/16 inch tube","handle":"3-way-brass-tee","description":"\u003cp\u003e3 way tee union hydraulic brass suit 3\/16 inch brake tube and HydraLine with 3\/8-24tpi tube nuts. Already with inverted flare seat.\u003c\/p\u003e","published_at":"2018-05-02T17:16:34+10:00","created_at":"2018-01-03T14:44:20+10:00","vendor":"Trailer Spares Direct","type":"HydraLine","tags":["brake fittings","Hydraline","Hydraulic brake","Trailer brakes"],"price":990,"price_min":990,"price_max":990,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":13017406865451,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"HU3","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"3 way brass tee suit 3\/16 inch tube","public_title":null,"options":["Default Title"],"price":990,"weight":50,"compare_at_price":null,"inventory_quantity":834,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/HU3.jpg?v=1520837151","\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/HU3_lines.jpg?v=1547351338"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/HU3.jpg?v=1520837151","options":["Title"],"content":"\u003cp\u003e3 way tee union hydraulic brass suit 3\/16 inch brake tube and HydraLine with 3\/8-24tpi tube nuts. Already with inverted flare seat.\u003c\/p\u003e"}
3 way brass hydraulic tee

3 way brass tee suit 3/16 inch tube

$9.90 incl. GST

3 way tee union hydraulic brass suit 3/16 inch brake tube and HydraLine with 3/8-24tpi tube nuts. Already with inverted flare seat.


More Info
{"id":682512810027,"title":"3500mm HydraLine brake hose - straight end fittings","handle":"3500mm-hydraline-straight-brake-hose","description":"\u003cp\u003eHydraLine is a flexible stainless steel braided brake hose designed to outlast conventional steel brake tubing and takes about 1\/5th of the time to fit. There are also less joins than conventional brake tubing therefore adding to the strength and durability. Made from braided stainless steel with a hardened Teflon inner tube and stainless end fittings that are already flared to seat in an inverted flare of a hydraulic union attached to the brake caliper, tee piece or to a hydraulic actuator. The Teflon inner tube limits the chance of swelling under hydraulic pressure compared to rubber brake hose. Hydraline meets Australian and international standards SAE1401J and USA DOT standards. Comes with a 1 year limited warranty.\u003cbr\u003e HydraLine comes with straight ends for lead lines, for the length of the trailer to the axle; and also 90 degree right angle fittings to fit into calipers in the shorter lengths. \u003cbr\u003e Fitting up the flexible brake line on your camper, caravan or trailer can be done in two ways: by sliding the flexible line up the box section of the trailer and pulling through holes where required, making a neater finish to the trailer; or by utilising P-clips to fasten the Hydraline to the \"i\" beam, box or C section of the trailer chassis.\u003c\/p\u003e\n\u003cp\u003eGenuine HydraLine contains the brand name on the braided brake line.\u003cbr\u003e Length: 3500mm braided brake hose \u003cbr\u003e End fittings: stainless straight, flared for fitting to inverted flare.\u003cbr\u003e Meets Australian Standards and International standards.\u003c\/p\u003e\n\u003cp\u003eRegular maintenance including \"bleeding\" of hydraulic brake lines is required to ensure the life of your brake calipers, actuator and brake lines. \u003cbr\u003e All calipers should be supplied with their own brake line union. If you do not have this union please purchase:\u003cbr\u003e HU4 - for Trojan, Alko, Meher, Trigg and Ark calipers\u003cbr\u003e HU5-M10 - for PBR type 1 and 2 calipers\u003cbr\u003e CW1 - Copper washer is required for use with both HU4 and HU5-M10\u003c\/p\u003e","published_at":"2018-05-02T17:06:45+10:00","created_at":"2018-01-03T14:34:24+10:00","vendor":"Trailer Spares Direct","type":"HydraLine","tags":["brake fittings","Hydraline","Hydraulic brake","Trailer brakes"],"price":6050,"price_min":6050,"price_max":6050,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":13017407553579,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"HL3500S","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"3500mm HydraLine brake hose - straight end fittings","public_title":null,"options":["Default Title"],"price":6050,"weight":220,"compare_at_price":null,"inventory_quantity":126,"inventory_management":"shopify","inventory_policy":"deny","barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/HYDRAline_2_bca6055f-fd1c-4a8b-b675-7f86dcad6b30.jpg?v=1547351344","\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/Hydraline_ends_6d7aafbb-1cab-44ce-9a65-2a122c6ff4c8.jpg?v=1547351344","\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/HL_ENDS_7e3bff9d-cffd-4c38-a615-fdf68403c3f0.jpg?v=1547351344"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2594\/0296\/products\/HYDRAline_2_bca6055f-fd1c-4a8b-b675-7f86dcad6b30.jpg?v=1547351344","options":["Title"],"content":"\u003cp\u003eHydraLine is a flexible stainless steel braided brake hose designed to outlast conventional steel brake tubing and takes about 1\/5th of the time to fit. There are also less joins than conventional brake tubing therefore adding to the strength and durability. Made from braided stainless steel with a hardened Teflon inner tube and stainless end fittings that are already flared to seat in an inverted flare of a hydraulic union attached to the brake caliper, tee piece or to a hydraulic actuator. The Teflon inner tube limits the chance of swelling under hydraulic pressure compared to rubber brake hose. Hydraline meets Australian and international standards SAE1401J and USA DOT standards. Comes with a 1 year limited warranty.\u003cbr\u003e HydraLine comes with straight ends for lead lines, for the length of the trailer to the axle; and also 90 degree right angle fittings to fit into calipers in the shorter lengths. \u003cbr\u003e Fitting up the flexible brake line on your camper, caravan or trailer can be done in two ways: by sliding the flexible line up the box section of the trailer and pulling through holes where required, making a neater finish to the trailer; or by utilising P-clips to fasten the Hydraline to the \"i\" beam, box or C section of the trailer chassis.\u003c\/p\u003e\n\u003cp\u003eGenuine HydraLine contains the brand name on the braided brake line.\u003cbr\u003e Length: 3500mm braided brake hose \u003cbr\u003e End fittings: stainless straight, flared for fitting to inverted flare.\u003cbr\u003e Meets Australian Standards and International standards.\u003c\/p\u003e\n\u003cp\u003eRegular maintenance including \"bleeding\" of hydraulic brake lines is required to ensure the life of your brake calipers, actuator and brake lines. \u003cbr\u003e All calipers should be supplied with their own brake line union. If you do not have this union please purchase:\u003cbr\u003e HU4 - for Trojan, Alko, Meher, Trigg and Ark calipers\u003cbr\u003e HU5-M10 - for PBR type 1 and 2 calipers\u003cbr\u003e CW1 - Copper washer is required for use with both HU4 and HU5-M10\u003c\/p\u003e"}
3500mm HydraLine brake hose - straight end fittings

3500mm HydraLine brake hose - straight end fittings

$60.50 incl. GST

HydraLine is a flexible stainless steel braided brake hose designed to outlast conventional steel brake tubing and takes about 1/5th of the time to fit. There are also less joins than conventional brake tubing therefore adding to the strength and durability. Made from braided stainless steel with a hardened Teflon inner tube and stainless end fi...


More Info